Wika FLR Manual de usuario descargar pdf (Pagina 5)

WIKA operating instructions level sensors model RMG

13442163.01 06/2010 GB/D/F

Note

The WIKA level transmitters only works correct when mounted in vertical

position. The max. deviation from the vertical is ± 30° and must not be

exceeded.

The oat (6) must be removed before installing the transmitter in

openings with a diameter smaller than the diameter of the oat.

The oat must be marked with „top“.

The oat should be retted inside the tank after installing the level

transmitter and the set collar (7) xed.

4. Electrical connection

Note

All cabling and electrical connections must be carried out in accordance

with the regulations applicable in the country where the equipment is

installed and by personnel qualied to do.

Current spikes may occur Malfunctions by using longer

cable lengths or if the lines are laid together with energy

lines. A screened cable must be used and earthed at one

end.

4. Electrical connection

1 2 3 4 5 6 7 8 9 10 ... 27 28

Sin comentarios

Wika FLR Manual de usuario Pagina 5