Wika CPC6000 Manual de usuario Pagina 24
- Pagina / 104
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Automated Pressure Calibrator
CPC 6000
24 Mensor/WIKA Operating Instructions - CPC 6000
4.4 General Specifications
Size 14.02” wide x 7.55” high x 12.42” deep (35.61 cm x
19.2 cm x 31.55 cm). See Figure 5.2.
Weight 36 lbs. (16.33 kg) with all internal options.
Power Input Requirements 100-240 VAC, 47-63 Hz, 75 VA max.
Fuses: 1.5A, 230V, Type T LITTLEFUSE 31301.5
Digital I/O Pin 1: +5 VDC, 100 mA max.
Pin 2: Input TTL levels. Voltage input should be limited
to > -0.3 VDC and < +5.3 VDC.
Pin 3: Output pulled up to 5 VDC with a 10k ohm
resistor. Source limited to 450uA, Sink 10mA
Pin 4: Ground.
Pneumatic Interfaces 7/16” – 20 female SAE.
1/8” FNPT adapters provided.
Particle Filters The instrument has 20-micron filters on all pressure
ports through the manifold.
The barometric transducer has no filters.
Pneumatic Overpressure Protection Sensors are protected by relief valves.
Compensated Temperature Range 15°C to 45°C.
Operating Temperature Range 0°C to 50°C. Note: This is not the compensated
temperature range.
Storage Temperature Range 0°C to 70°C. Minimal vibration.
Non-condensing humidity.
Local User Interfaces 8.4” color LCD display with 8 wire resistive touch
screen.
Remote User Interfaces RS-232, Ethernet, and IEEE-488.1 are standard.
Warm-up Approximately 15 minutes to achieve full accuracy
depending on environment.
Reading Rate Typically 32 readings per second.
Measure Response Time <333 mS for FS step.
Orientation Effects Negligible, can be removed with re-zeroing.
Operating Environment 5 to 95% RH non-condensing.
Pressure Media Clean, dry, non-corrosive, non-combustible, non-
oxidizing gases. Not suitable for oxygen use.
Compliance
See section “1.3 Compliance”
Options Transport Case, Rack Mount Kit, Calibration Sled
Kit, Secondary Transducer, Barometric Reference
Transducer, Virtual Delta Channel
- CPC 6000 1
- 2. Safety Notices 11 3
- 3. Product Description 13 3
- 4. Specifications 21 3
- 5. Installation 25 3
- 1. General Information 7 3
- 6. Local Operation 29 4
- 7. Remote Operation 45 4
- 8. Options 71 5
- 9. Maintenance 77 5
- 10. Calibration 89 5
- 11. Appendix 99 6
- 1. General Information 7
- Automated Pressure Calibrator 10
- 2. Safety Notices 11
- 3. Product Description 13
- Absolute 21
- Bi-Directional 21
- 5. Installation 25
- 6. Local Operation 29
- 7. Remote Operation 45
- 8. Options 71
- 9. Maintenance 77
- 10. Calibration 89
- 11. Appendix 99
Relacionado con productos y manuales para Instrumentos de medición Wika CPC6000
Instrumentos de medición Wika CPH6200 Manual de usuario
(100 paginas)
(100 paginas)
Instrumentos de medición Wika CPH6000 Manual de usuario
(132 paginas)
(132 paginas)
Instrumentos de medición Wika CPH62I0 Manual de usuario
(160 paginas)
(160 paginas)
Instrumentos de medición Wika CPH65I0 Manual de usuario
(100 paginas)
(100 paginas)
Instrumentos de medición Wika CPH65I0 Manual de usuario
(100 paginas)
(100 paginas)
Reebok Fitness RX 2000 RBTL14911 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Sport und Erholung Reebok Fitness RX 2000 RBTL14911.
Wir stellen 1 PDF-Handbücher Reebok Fitness RX 2000 RBTL14911 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentarios a estos manuales