Wika CPH65I0 Manual de usuario descargar pdf (Pagina 27)

27WIKA operating instructions, model CPH65I0

14061681.02 03/2013 GB/D

6. Commissioning, operation

Use the F2 and F3 keys to select the time after which the calibrator will turn itself o, or

disable the auto shut-o by scrolling down to "0".

Use the "AUTO OFF DONE" option to set the parameters and return home. The auto

shut-o time is reset whenever a key is pressed.

6.4.5 Activating and deactivating a display

Use the "DISPLAY" option on the 'Display selection' main menu to access the display

activation menu.

The F2 key can be used to select the desired display. The "ON/OFF" option switches

the selected display on or o. The selected display and the current status "ON/OFF" are

shown in the lower display.

Select the "DONE" option to save the changes and return home. When a display

is deactivated its conguration is retained. As soon as the display is activated, the

conguration is checked against the congurations of the other currently-active displays.

If there is any conict between congurations, the recalled display’s conguration is

modied to avoid the conict. If all three displays are deactivated the lower display will

switch on automatically.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 99 100

Sin comentarios

Wika CPH65I0 Manual de usuario Pagina 27