Wika CTD9300 Manual de usuario Pagina 9
- Pagina / 134
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
9037926 03/2005
9WIKA Operating Instructions CTD 9300 Rev. 1
2.2 Structure
Temperature dry well calibrators consist of an electrically heated
metal block and a control unit. The two components are
accommodated in a robust metal housing together with a fan. The
metal block is fitted with a bore in its centre for holding the
adapting sleeve. This adapting sleeve contains one or several bores
of different diameters for thermically coupling thermometers of
various thicknesses optimally to the heated metal block. Good
thermal coupling between the block, the adapting sleeve and the
thermometer is very important for keeping measuring uncertainty
during calibration to a minimum.
Temperature Dry Well Calibrators CTD 9300
2. Device Description
GB
2.1 Intended Use
2. Device Description
The calibrators of the CTD 9300 series may be used exclusively for
the calibration and verification of thermocouples, resistance
thermometers, mechanical thermometers and temperature
switches.
The introduction of foreign substances such as oil or heat
conductive paste with the aim of enhancing the heat transfer to the
probe can damage the calibrator and the adapting sleeve.
In addition, there is a risk of injury due to abruptly evaporating
fluids and hazardous gases that may form when fluids evaporate.
Always ensure that the testing temperature is not too high for the
probe. Otherwise, the probe may be destroyed.
Remove all highly combustible media from the vicinity of the
device and ensure that the device cannot come into contact
with easily inflammable or explosive media.
- 9037926 03/2005 2
- Contents 3
- 1. General Instructions 5
- 2. Device Description 10
- 3. Moduses and Functions 21
- 4. Operating the Calibrator 51
- 5. Technical Data 60
- 6. Appendix 64
- 1. Allgemeine Hinweise 71
- 2. Gerätebeschreibung 75
- 3. Modi und Funktionen 100
- 4. Betreiben des Kalibrators 117
- 5. Technische Daten 127
- 6. Anhang 131
- WIKA Service 134
Relacionado con productos y manuales para Instrumentos de medición Wika CTD9300
(96 paginas)
Instrumentos de medición Wika CAL Manual de usuario
(136 paginas)
(136 paginas)
Instrumentos de medición Wika BCS10 Manual de usuario
(108 paginas)
(108 paginas)
Philips DLM52526/10 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Ladegeräte Philips DLM52526/10.
Wir stellen 1 PDF-Handbücher Philips DLM52526/10 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt
Comentarios a estos manuales