Wika CPH6200 Manual de usuario descargar pdf (Pagina 18)

Hand-Held Pressure Indicator

CPH6200-S1 / CPH6200-S2

11221780.1.3 01/2009 GB/D/F/E

WIKA Operating Instructions Hand-Held Pressure Indicator18

Max. number of measurements: 99

The data recorded includes the following values:

Sensor 1 instantaneous value at that data point

Sensor 1 Min-Peak, Max-Peak since last data point

Sensor 2* instantaneous value at that data point

Sensor 2* Min-Peak, Max-Peak since last data point

Instantaneous difference (Sensor 1 - Sensor 2)* at that data point

Min-Peak, Max-Peak of the difference (Sensor 1 - Sensor 2)*, Min-

Peak, Max-Peak since last data point

Time and date stamp of that data point

* Only for 2-channel version CPH6200-S2

After each recording “St. XX“ will be displayed for a short time. XX

represents the number of the data point.

If the logger memory already contains data:

When the ´Store/Quit´ key is pressed for 2 seconds, the option to clear

the logger memory will be displayed:

clear clear nothing

all data points (cancel menu)

clear the last

data point

Use the ´Min´ or the ´Max´ key to display the required option. The

´Store/Quit´ key selects that choice.

If the logger memory is full, the display will show:

Viewing Recorded Measurements

Within the “LoGG-Stor“ function the measurements can be viewed

directly on the instrument display as well as through a computer (“Func-

CYCL“ only allows for the data to be viewed on computer). Press the

´Set/Menu´ key for 2 seconds: The first menu displayed is now “rEAd-

LoGG“ (read logger data). By then pressing the ´Tare´ key, the last

measurement recorded will be displayed; pressing the ´Tare´ key again

scrolls between the different values related to this data point.

Pressing the ´Min´ key or ´Max´ key selects different data points.



1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 99 100

Sin comentarios

Wika CPH6200 Manual de usuario Pagina 18