Wika IPT-11 Manual de usuario descargar pdf (Pagina 18)

6 Set up with the indicating and adjustment

module

6.1 Short description

The indicating and adjustment module is used for measured value

display, adjustment and diagnosis. It can be mounted in the following

housing versions and instruments:

l All sensors of the IPT-1* instrument family, in the single as well as

double chamber housing (optionally in the electronics or connec-

tion compartment)

l External indicating and adjustment unit

Note:

You can ﬁnd detailed information on adjustment in the operating

instructions manual "Indicating and adjustment module".

6.2 Insert indicating and adjustment module

The indicating and adjustment module can be inserted and removed at

any time. It is not necessary to interrupt the voltage supply.

For installation, proceed as follows:

1 Unscrew the housing cover

2 Place the indicating and adjustment module in the desired position

on the electronics (you can choose any one of four diﬀerent

positions - each displaced by 90°)

3 Press the indicating and adjustment module onto the electronics

and turn it to the right until it snaps in.

4 Screw housing cover with inspection window tightly back on

Removal is carried out in reverse order.

The indicating and adjustment module is powered by the sensor, an

additional connection is not necessary.

Function/Conﬁguration

Mount/Dismount indicat-

ing and adjustment

module

18 Process pressure transmitter IPT-1* Vers. 3.0 - metalic sensor • 4 … 20 mA

6 Set up with the indicating and adjustment module

37300-EN-100302

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Sin comentarios

Wika IPT-11 Manual de usuario Pagina 18