Wika D-11-7 Manual de usuario Pagina 27
- Pagina / 112
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
27WIKA operating instructions pressure transmitter model D-1x-7
2478159.05 12/2011 GB/D/F/E
GB
8. Faults
8. Faults
In the event of any faults, rst check whether the pressure transmitter is mounted correctly, mechanically
and electrically.
Faults Causes Measures
No output signal Cable break Check the continuity
Deviating zero point signal Overpressure safety exceeded Observe the permissible overload limit
Deviating zero point signal Too high/low working temperature Observe the permissible temperatures
Constant output signal upon
change in pressure
Mechanical overload caused by
overpressure
Replace instrument; if it fails repeat-
edly, contact the manufacturer
Signal span too small Mechanical overload caused by
overpressure
Replace instrument; if it fails repeat-
edly, contact the manufacturer
Signal span varies EMC interference sources in the
environment; for example, frequency
converter
Shield instrument; cable shield;
remove source of interference
Signal span varies/inaccurate Too high/low working temperature Observe the permissible temperatures
Signal span drops / too small Signal span drops / too small Contact manufacturer and replace
instrument
If complaint is unjustied, we will charge you the complaint processing fees.
CAUTION!
If deciencies cannot be eliminated by means of the measures listed above, shut down the
instrument immediately, and ensure that pressure and/or signal are no longer present, and
secure the instrument from being put back into operation inadvertently. In this case, contact
the manufacturer. If a return is needed, please follow the instructions given in chapter "9.2
Return".
- Druckmessumformer Typ D-1x-7 1
- Contents 3
- 1. General information 4
- 2. Safety 6
- 3. Specications 10
- 4. Design and function 11
- 6. Commissioning, operation 12
- 7. Maintenance and cleaning 26
- 8. Faults 27
- 1. Allgemeines 32
- 2. Sicherheit 34
- 3. Technische Daten 37
- 4. Aufbau und Funktion 39
- 6. Inbetriebnahme, Betrieb 40
- 7. Wartung und Reinigung 54
- 8. Störungen 55
- Sommaire 57
- 1. Généralités 58
- 2. Sécurité 60
- 4. Conception et fonction 65
- Selon EN 837 67
- Selon DIN 3852-E NPT, R et PT 67
- Schéma de raccordement 68
- Envoyer un message 70
- Données de sortie 72
- (depuis le maître) 72
- Description 79
- 7. Entretien et nettoyage 80
- 8. Dysfonctionnements 81
- Contenido 85
- 1. Información general 86
- 2. Seguridad 88
- 3. Datos técnicos 91
- 4. Diseño y función 93
- Esquema de conexión 96
- Datos de salida 100
- (del master) 100
- Datos de entrada Aclaración 100
- 2478159.05 12/2011 GB/D/F/E 101
- Telegrama de envío 102
- Descripción 107
- 7. Mantenimiento y limpieza 108
- 8. Fallos 109
- WIKA global 112
Relacionado con productos y manuales para Instrumentos de medición Wika D-11-7
Instrumentos de medición Wika DG-10 Manual de usuario
(112 paginas)
(112 paginas)
Instrumentos de medición Wika E-11 Manual de usuario
(19 paginas)
(19 paginas)
Instrumentos de medición Wika HP-2 Manual de usuario
(84 paginas)
(84 paginas)
(60 paginas)
(48 paginas)Reebok Fitness RX 2000 RBTL14911 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Sport und Erholung Reebok Fitness RX 2000 RBTL14911.
Wir stellen 1 PDF-Handbücher Reebok Fitness RX 2000 RBTL14911 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentarios a estos manuales