Wika T19 Manual de usuario descargar pdf (Pagina 5)

2143014.05 06/2014 GB/D

WIKA operating instructions temperature transmitter, model T19

2. Before mounting

2.1 Transmitters with standard measuring ranges

Series T19 transmitters with standard measuring ranges are congurable

by means of solder bridges. Access to the solder bridges is gained after

removing the bottom of the casing. Mounted transmitters have to be

dismantled rst before they can be congured.

To work properly, the transmitter has to be congured. Make

sure that the transmitter is congured before mounting.

Conguration is to be carried out as described in section 3.

As an option standard measuring ranges can be congured at the factory

and in this case the appropriate measuring range is printed on the rating

plate. Transmitters with standard measuring range congured at the

factory can be immediately tted at the measuring point and put into

operation.

2.2 Transmitters with special measuring ranges

Series T19 transmitters with special measuring ranges cannot be

recongured. Special measuring ranges can be recognised by a 9 as last

digit in the model designation: T19.x0-xx0-9

Special measuring ranges are congured at the factory and can be

immediately tted at the measuring point and put into operation.

2. Before mounting

1 2 3 4 5 6 7 8 9 10 ... 23 24

Sin comentarios

Wika T19 Manual de usuario Pagina 5