Wika CPH6000 Manual de usuario descargar pdf (Pagina 20)

20 WIKA operating instructions ProcessCalibrator, model CPH6000

11069023.04 11/2012 GB/D

Voltage

supply

Example with a WIKA pressure transmitter with V signal as the test item:

1. without its own power supply, DC 24 V must be activated via the menu (see chapter

7.3 "Operating modes")

2. with its own power supply available

4.4 CPT6000 reference pressure sensor

For the CPH6000 ProcessCalibrator, there are many reference pressure sensors

to choose from (with measuring ranges from 250 mbar up to 1,000 bar with an

accuracy of 0.025 %; and measuring ranges over 1,000 bar up to 6,000 bar with an

accuracy of 0.1 %) which can be interchanged quickly and without tools. When the

ProcessCalibrator is switched on, the reference pressure sensor attached is recognised

automatically, so that no further conguration is needed.

4. Design and function

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 131 132

Sin comentarios

Wika CPH6000 Manual de usuario Pagina 20