Wika CPH6000 Manual de usuario descargar pdf (Pagina 58)

58 WIKA operating instructions ProcessCalibrator, model CPH6000

11069023.04 11/2012 GB/D

SELECT

..Interface

USB

RS232

(8N1)

9600

7.4.6 SETUP additional menu items: Interface

7. Commissioning, operation

This menu allows the conguration of the interface. It can be congured for USB or

RS-232.

For the RS-232 interface there is a choice of 3 dierent baud rates with xed 8 used

data bits, no parity and 1 stop bit.

The USB connection can be switched on and o. In order to extend the battery life, the

USB connection should be deactivated when not in use.

7.4.7 SETUP additional menu items: CLEAR CalData

If the SETUP menu item "CLEAR CalData" is selected with the cursor and then the

SELECT button pressed 2x, then all stored calibration data will be deleted and reset.

The status of the deletion process is shown at the left of the lower Info

screen.

Select serial interface

Conrm selection

Change between interface

tape and baud rate

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 131 132

Sin comentarios

Wika CPH6000 Manual de usuario Pagina 58